Journey of Limitless Creativity —
| Item | Capability | Details |
|---|---|---|
| Layers | 1-18 Layers | 1 layer, 2 layers, 4 layers, 6 layers, 8 layers, 12 layers, 14 layers, 16 layers, 18 layers |
| Material | FR-4 and Rogers | FR-4 ( TG130, TG150, TG170 ), Rogers 4003C and 4350B |
| Max size | 500 mm × 1100 mm | ≤2 layers: 26 × 45 inch； ≥3 layers: 25.5 × 38 inch |
| Outline tolerance | ±0.1 mm | CNC tolerance ±0.1 mm |
| Board thickness | 0.2 mm – 4.0 mm | 0.2 / 0.3 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.6 / 2.0 / 2.4 / 3.0 / 3.2 / 3.4 / 3.6 / 3.8 / 4.0 mm |
| PCB thickness tolerance (t ≥ 1.0 mm) | ±10% | Note: Due to the production reason, the tolerance usually + |
| PCB Thickness Tolerance (t ≤ 1.0 mm) | ±0.1 mm | Note: Due to the production reason, the tolerance usually + |
| Min Trace Width | 4 mil (0.1 mm) | Better try to > 6 mil, as the PCB cost will be lower |
| Min Trace Distance | 4 mil (0.1 mm) | Better try to > 6 mil, as the PCB cost will be lower. |
| Final Outer Copper | 1 oz – 10 oz | 1 oz, 2 oz, 3 oz, 4 oz, 5 oz, 6 oz, 7 oz, 8 oz, 9 oz, 10 oz |
| Final Inner Copper | 0.5 oz – 4 oz | 0.5 oz, 1 oz, 2 oz, 3 oz, 4 oz |
| Drill Size (Machine Drill) | 0.2 mm – 6.5 mm | PTH hole size tolerance ±3 mil, NPTH hole size tolerance ±2mil |
| Via Annular Ring | ≥ 0.153 mm (6 mil) | Annular ring surrounded by traces should be no less than 0.153mm |
| Type of Solder Resist | Liquid Photo Imaginable Solder Mask | Colors: green, blue, yellow, red, black, white, purple |
| Minimum Silkscreen Character Width | ≥ 0.15 mm | Otherwise it will be not clear for visual |
| Minimum Silkscreen Character Height | ≥ 0.8 mm | Otherwise it will be not clear for visual |
| Distance From Trace to Outline | ≥ 0.3 mm (12 mil) | For routing, distance should ≥ 0.3 mm; For V-cut, distance should be ≥ 0.4 mm |
| Panelization With Gap | 1.6 mm | For routing penalization, make sure the space between boards ≥ 1.6mm |
| Polygon Pour With Pads | Hatch | We use Hatch for copper pouring. Customer who use Pads to design PCB please notice |
| Slot Drawing With Pads | Use Drill Drawing Layer | For unplated Slot, please draw it in Drill Drawing Layer |
| Protel/dxp Outline Layer | Keep out layer or mechanical layer | Please note: There should be only 1 outline layer in 1 file. Please choose 1 from Keepout and mechanical when drawing the outline. |
| Min. Half Hole Diameter | 0.6 mm | Min. size for half hole diameter should be ≥ 0.6mm |